Price $2,191.33

Base Kit Id 1665FSL

STEP 2:

These 2" Coilover Systems are designed to build on the stout factory front suspension design on the RAM 1500 trucks and take performance to the next level while leveling out the stance.

At the heart of these 2" leveling kit are a pair of specially tuned FOX 2.0 performance race series coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX"s proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation.This kit takes performance for the next level by upgrading to FOX 2.0 performance series. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory coil springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance.

You are watching: 6 inch lift kit for dodge ram 1500 4wd

Tire & Wheel Combinations33x12.50 w/20x9 and 5" back spacing33x12.50 w/18x9 and 5" back spacing

*Trimming may be required*

Est. Installation: 3 hours Difficulty Level (easy 1 - 5 complicated): 3
2" (2.5 DSC) Coilover Leveling Kit

Price $3,221.38

Base Kit Id 1665FDSC

STEP 2:

These 2" Coilover Systems are designed to build on the stout factory front suspension design on the RAM 1500 trucks and take performance to the next level while leveling out the stance.

At the heart of these 2" leveling kit are a pair of specially tuned FOX 2.5 factory race series coilovers available with DSC (dual speed compression) adjusters. These coilovers are backed by FOX"s racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs with mounting brackets. The DSC reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of BDS performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory coil springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance.

Tire & Wheel Combinations33x12.50 w/20x9 and 5" back spacing33x12.50 w/18x9 and 5" back spacing

*Trimming may be required*

Est. Installation: 3 hours Difficulty Level (easy 1 - 5 complicated): 3
4" Lift Kit

Price $2,345.96

Base Kit Id 670H

STEP 2:

BDS Suspension 4" Suspension Lift Kit for Dodge Ram 1500 4WD Gasl 1/2 Ton Pickup.

FourWheeler Magazine Tech Story

This 4" lift kit will clear up to 35" tires and is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance.

The replacement steering knuckles reduce installation time as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.

The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.

The rear is lifted via BDS 2" coil spacers to level most trucks. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets and sway bar links. A 3" rear coil spring option is available depending on your desired stance.

Check out more options and build your own kit by clicking on customize this kit.

Tire & Wheel Combinations35" x 12.50" w/17 x 9 and 4-1/2" back spacing35" x 12.50" w/18 or 20 x 9 and 5" back spacing

*Trimming may be required*

Est. Installation: 10 hours Difficulty Level (easy 1 - 5 complicated): 4
6" Lift Kins

Price $2,576.49

Base Kit Id 671H

STEP 2:

BDS Suspension 6" Suspension Lift Kit for Dodge Ram 1500 4WD Gas 1/2 Ton Pickup.

This 6" lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.

The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.

The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.

Due to the OE ride height variances, BDS allows you to customize your desired stance by offering both 3" or 5" rear Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.

Rear NX² series shock absorbers are included with BDS by Fox 2.0 series gas shocks available as an upgrade.

Tire & Wheel Combinations37" x 12.50" w/17 x 9 and 4-1/2" back spacing37" x 12.50" w/18 or 20 x 9 and 5" back spacing

*Trimming may be required*

Est. Installation: 10 hours Difficulty Level (easy 1 - 5 complicated): 4
6" Coil-Over Lift Kit

Price $4,681.18

Base Kit Id 671F

STEP 2:

BDS Suspension 6" Coil-Over Suspension System for Dodge Ram 1500 4WD Gas 1/2 Ton Pickup.

Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 4-6" Dodge 1500 4WD suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement.

This lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.

The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.

The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.

Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to 6" of lift for an easy installation, but can be adjusted down to 4" or fined tuned anywhere in between to your liking.

See more: What Is The Primary Difference Between An Entity And An Attribute In Database

BDS allows you to customize your desired stance by offering 2" rear coil spacers or 3" and 5" Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.

BDS by Fox 2.0 series rear gas shocks come standard to match the front 2.5" Fox Coil-overs.

Customer Testimonial

"I"ve had your 6" coilover system on my 14 ram half ton for a year. In the past two days I logged 3150 miles from Alaska through Canada and back. To completely test the suspension system, the truck traveled at 70 mph over all terrains encountered. Traveling throughout the US, the alaska highway is the most brutal testing ground. Your suspension system exceeds all expectations. Ride quality was at 100 % throughout trip. - Jarrod P (Alaska)

Tire & Wheel Combinations37" x 12.50" w/17 x 9 and 4-1/2" back spacing37" x 12.50" w/18 or 20 x 9 and 5" back spacing

*Trimming may be required*

Est. Installation: 10 hours Difficulty Level (easy 1 - 5 complicated): 4

BDS Suspension
*

We make every effort to buy American and we hope you do as well. Buying American ensures that you are getting quality products made from quality materials. Just as important is the fact that buying American keeps your hard-earned money in the American economy. This is one of the biggest ways we as consumers can help revitalize the American economy and strengthen the US dollar. It doesn"t matter whether you are buying clothing, groceries or parts for your truck…buy American and buy with confidence that your money will stay in America.